INTERMATIC INCORPORATED | 1950 Innovation Way, Suite 300 | Libertyville, Illinois 60048 | www.intermatic.com 5
Intermatic Connect 365-Day Programmable Smart Wi-Fi Timer Programming Guide: Models ETW2CP, ETW3CP
Deleting Schedules
To delete a saved schedule, select a Schedule from Home, then select “Delete”
and “Confirm”.
Schedule Sharing
Send a schedule via text or email.
From the Home Screen Schedules.
Select the “Share Icon” in the upper right and a link will be created. Then select
your method of delivery on your mobile device.
SETTINGS
Time/Date/Location
This information is populated once connected to Wi-Fi and the Cloud.
Input Override Time
Select “Infinite” if Override is the master (Output will stay overridden).
Select “Override Time” to expire and return to scheduled state. Choose between
1 minute and up to 23 hours and 59 minutes
Service Timer
Select Infinite or limit service mode to expire and return to scheduled state.
Choose between 1 minute and 23 hours and 59 minutes.
Outputs and Inputs
Selecting these will open the page to adjust inputs or outputs.
System Settings
Select a value for a Blink Warn for each circuit (0-255 minutes).
This will momentarily flash the circuit off once the set value is reached.
Select “Firmware Auto Update”. Deselect for manual update.
Wi-Fi Settings
To reset Wi-Fi settings, perform a Wi-Fi reset by pressing and holding all circuit
On/Off buttons on the unit simultaneously for 3 seconds until the circuit LEDs
flash once in sequence.
To Next Page
Loading...
Need help?
General
