Intermatic PE1501RC - System Overview

To Next Page

To Previous Page

6 Mini-Wave PE4 Installation Guide

Section 1:

System Overview

The Intermatic Mini-Wave Pool/Spa PE4 Wireless Control System brings wireless control to a new

level of simplicity and affordability. What makes the system distinctive is that it is:

Easy to Use — with simple, push button controls and a clear, easy-to-read display panel

Everything You Need — providing, in its standard conguration, the functionality and

control called for in nearly every installation.

Dependable — with Z-Wave

technology that lets you plug inexpensive repeaters into an

electrical outlet to relay signals in any part of the site with dead spots. Z-Wave

technology

eliminates intermittant signal problems experienced with many other systems.

Cost Efciency — a superior system, easier to install and maintain, with better

dependability, and at a cost that’s competitive with any other system available.

The standard conguration for the Mini-Wave Pool/Spa PE4 Wireless Control System

conguration is shown in Figure 1-1. You can order individual components for a custom

conguration or system as indicated.

•

Removable antenna (PA118)

can be ordered separately

Hand-Held Transceiver (PE950).

Up to 5 units can be used with an

Mini-Wave system. Additional

units can be ordered separately.

24-volt Valve Actuators (PE24VA)

provide reliable control of 2-way

and 3-way diverter valves. (Two are

included, additional units can be ordered)

Mini-Wave Steel Outdoor Enclosure ,

with rectangular side knockout for

mounting switches or GFCI receptacles.

Included is a 100 Amp circuit breaker

bus capable of supporting up to eight

circuit breakers from various breaker

manufacturers.

Panel-Mounted Transceiver (PE650).

Includes Antenna (PA118).