Intermatic PE1501RC - Key Components; Valve Actuator and Transceivers

One: System Overview 7
Providing a brighter solution.™
The standard system (PE1541RC) is shipped with the panel-mounted transceiver attached to the
top of the enclosure, with antenna to be attached. Components are already interconnected and
are ready for wiring.
You can order most system components individually to assemble a custom Mini-Wave system as
desired.
Additional Detail on Key Components
24-Volt Valve Actuator (PE24VA)
Designed with quality in mind, Intermatic’s 24-volt valve actuators
provide reliable control of 2-way and 3-way diverter valves for pool/
spa combinations and water features. The water ow can be altered
for specic applications through the adjustable cam, which rotates
diverter valves to multiple degree settings. The cam settings can be
easily adjusted by simply removing the lid. These valve actuators are
compatible with all pool/spa valves currently offered in the industry and
will retrot into all pool/spa control systems.
24VAC Input Voltage
Automates compatible diverter
valves for pool/spa combos
Adjustable cam rotates diverter
valves to multiple degree settings
•
•
•
Designed to operate most 2-way and 3-way diverter
valves
Shipping Weight - 3 lbs. (1.4 kg)
Agency Approval - CSA/C-US
•
•
•
Panel-Mounted Transceiver (PE650) Includes Antenna (PA118)
The main function of the Panel-Mounted Transceiver is to take commands from
the Wireless Hand-Held Transceiver (PE950) and hand them off to the two circuit
boards in the Mini-Wave enclosure.
In cases where the two devices are too far apart for direct communication, a
Transceiver Repeater Module (HA04C) will relay commands between the two
devices. Shown here with its removable antenna (PA118).
Wireless Hand-Held Transceiver (PE950)
The main function of the Wireless Hand-Held Transceiver is to transmit user
commands to the Panel-Mounted Transceiver (PE650) and display the status
of the equipment. The device can control up to ve loads, typically:
Four or ve relay loads depending on the conguration
The actuator for a water feature
The actuators that switch between pool and spa
The unit oats if thrown in the pool or spa, is water-submersible, shock
resistant, and requires three (3) AA batteries. Expected battery life is about
one year in typical use.
•
•
•