Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
PB21 and PB31 Mobile Receipt Printer User Guide 5
There is only one LED on the printer: the Ready-to-Work™ indicator.
Understanding the Soft Keys
Button Soft Keys Description
• Moves up one level in the menu system. This soft
key appears in Setup mode.
• Increases the value of a number when editing
settings such as an IP address. This soft key
appears in Setup mode.
• Pauses the printing job. This icon appears only
when you are printing.
Exit Setup mode and return to Ready mode.
Moves through the settings at the same level in the
menu system.
• Moves down one level in the menu system and
saves changes to a setting.
• Exits a printing job or exits Information mode.
Understanding the Ready-to-Work Indicator
Indicator State Description
Off One of several conditions:
• The printer is in Standby mode.
• The printer is in Info mode.
• The printer is in Setup mode.
On The printer is turned on and operating.
Blinking One of several conditions:
• The printer is out of paper.
• The media cover is open.
• There is a printer error that requires you to perform an
action. For a list of possible problems, see
“Troubleshooting the Printer” on page 54.
To Next Page
Loading...
Need help?
General
