Chapter 2 — Configuring the PB21 and PB31
PB21 and PB31 Mobile Receipt Printer User Guide 43
Changing Configuration Settings from the Printer Home Page
If you are have a printer with an 802.11 wireless radio, you can change
configuration settings from the home page of the printer.
To make changes to the configuration
1 Establish a connection between your printer and the network. For
help see “Setting Up 802.11 Radio Communications” on
page 33.
2 Connect your PC to the same network that the printer is on.
3 Change the printer language to Fingerprint or IPL. For help, see
“Changing the Printer Language” on page 7.
4 If you are using Fingerprint or IPL,
a Press the Setup button .
b Press the until you reach Network.
c Press to enter the Network system menu.
d Press until you reach IP address.
e Press to view the IP address.
5 Start a web browser.
6 In the address field, type the IP address of your printer and press
Enter. The home page of the printer appears.
7 Click Login and enter your administrator name and password.
8 On the home page of the printer, click Configuration.
For help with Fingerprint, IPL, ESC/P, or SmartSystems commands
and information, see either the Intermec Fingerprint Command
Reference Manual, the Intermec Printer Language (IPL) Command
Reference Manual, the ESC/P Programmer’s Reference Manual or
SmartSystems online help. You can download these documents from
the Intermec website at www.intermec.com.
To Next Page
Loading...
Need help?
General
