Chapter 1 — Using the PB21 and PB31 Mobile Receipt Printer
PB21 and PB31 Mobile Receipt Printer User Guide 7
Changing the Printer Language
You can change the printer command language using PrintSet, the
printer home page, a communications program like HyperTerminal,
or the printer display.
To change the printer language using PrintSet
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start PrintSet. The Intermec PrintSet dialog box appears.
3 Under My Printers, click the printer you want to work with.
4 Click Printer > Language Wizard. The Language Wizard appears.
5 Follow the prompts for the Language Wizard to change the
language for your printer.
To change the printer language using Fingerprint and a
communications program
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start a communications program like HyperTerminal.
3 Send the enable administrator rights command:
run “su -p pass admin
4 Send the run command to change the printer language to IPL:
setlanguage IPL -r
To change the printer language using IPL and a communications
program
1 Connect your printer to your PC using a serial cable. For help, see
“Connecting the Printer Through the Serial Port” on page 29.
2 Start a communications program like HyperTerminal.
3 Send the enable administrator rights command:
<STX><ESC>.y, su -p pass admin <ETX>
4 Send the run command to change the printer language:
<STX><EXC> .y,setlanguage FP -r<ETX>
To Next Page
Loading...
Need help?
General
