Appendix A — Specifications
68 PB21 and PB31 Mobile Receipt Printer User Guide
Specialty media is required for unique customer environments,
including printer operating temperature extremes. Intermec
recommends that you test the media in your application.
Supported Media
The printer supports tag and receipt media. Receipt media is
supported in both a top coated and an uncoated paper in continuous
roll stock only.
The default media sensitivity number is 180. Use this table as a guide
when setting sensitivity numbers.
External Fanfold Media Specifications
Stack height: 70 mm (2.75 in)
Page length: 152 mm (6 in) to 305 mm (12 in)
Note: A 6-inch page length is supplied in 12-inch long stacks (two
6-inch stacks of equal height with the bottom page linked).
Recommended Media Sensitivity and Constant
Sensitivity Constant Description
North America Receipt Media
401 85 Duratherm TC
102 32 Duratherm NTC - 2
101 30 Duratherm NTC
104 80 Duratherm Receipt - Fanfold
103 100 Duratherm Linerless
To Next Page
Loading...
Need help?
General
