INTERNORMEN IFPM21 - Silica-Gel Air Filter; Emptying the Vacuum Chamber

•
The rotating direction of t
After
checking the rotating direction switch off the unit
•
If the rotating direction is wrong, the phases can be changed at the connector with a
screwdriver.
Apply screwdriver here and turn left/right
4.1.4. Silica-Gel
air filter
•
Before initial operation
completely the throttle valve of the air line
4.1.5. E
mptying the vacuum chamber
•
This message will allow e
system or as preparation fo
The rotating direction of t
he vacuum pump is synchronized with the hydraulic pump.
checking the rotating direction switch off the unit
If the rotating direction is wrong, the phases can be changed at the connector with a
Apply screwdriver here and turn left/right
air filter
Before initial operation
remove the sealing of the Silica-
Gel air filter and
completely the throttle valve of the air line
.
mptying the vacuum chamber
This message will allow e
mptying of the vacuum chamber in order to conserve the
system or as preparation fo
r handling of a different tank.
10
he vacuum pump is synchronized with the hydraulic pump.
checking the rotating direction switch off the unit
.
If the rotating direction is wrong, the phases can be changed at the connector with a
Gel air filter and
open
mptying of the vacuum chamber in order to conserve the