INTERNORMEN IFPM21 - Motor Overload Hydraulic Pump; Motor Overload Vacuum Pump

23 pages

To Next Page

To Previous Page

5.5. Motor overload hydraulic pump

• This message will be displayed, if the switch to protect the motor of the hydraulic pump

is activated.

⇒ Check the power supply, all three phases must be present.

⇒ After checked, open the control box and reset the motor protection switch manually

5.6. Motor overload vacuum pump

• This message will be displayed, if the switch to protect the motor of the vacuum pump is

activated.

• ⇒ Check the power supply, all three phases must be present.

• ⇒ After checked, open the control box and reset the motor protection switch manually