INTERNORMEN IFPM21 - Selection of the Viscosity Range

11
4.1.6. Selection of the viscosity range
• This message is for selection of the viscosity of the oil which will be purified.
• Temperature influences must be considered at this selection.
This adjustment influences the overflow safety of the unit and
can lead to malfunction and breakdowns at a wrong selection.
• Select viscosity setup with [ ↵
↵↵
↵ ].
• Select viscosity range and confirm with
[ ↵
↵↵
↵ ].
• The adjustment of the viscosity is classified into three ranges:
ISO VG 32
ISO VG 46
ISO VG 68
ISO VG 100
ISO VG 150
ISO VG 220
ISO VG 220
ISO VG 320
ISO VG 460
Hit [
↵
↵↵
↵ ] to start.