Interquartz Gemini IQ333 - Basic Operation; Redial;Pause Key; Hearing-Aid Compatibility

9
BASIC OPERATION
This telephone can be used as a normal telephone; lift the HANDSET to answer an incoming call, or lift the
HANDSET and dial on the KEYPAD to commence an outgoing call. Please refer to the appropriate sections to
learn more about advanced operating instructions.
REDIAL/PAUSE KEY
Redial Function
Press to redial the last number previously dialed, which may be up to 32 digits long. Dialing more than 32 digits
during one call will cause erasure of the entire number from the redial memory.
EXAMPLE:ToRedialLastNumber
1. Lift HANDSET, or press HANDSFREE/HEADSET KEY
2. Press REDIAL.
Pause Function
ThePausecommandmaybeneededifyourphoneisconnectedtoanynetworkwhereapauseisrequired
(e.g.betweeninternalandexternaldialtones).
For manual dialing:
1. Lift HANDSET
2.Dialanydigitsrequiredbeforethepause
3. Press PAUSE
4. Dial the remaining digits.
For memory usage (storage procedure):
1. Lift HANDSET, or press HANDSFREE/HEADSET KEY
2. Press STORE
3.Dialdigitsrequirede.g.numberlineaccesscodebeforedialingthepause
4. Press PAUSE
5. Dial remaining digits
6. Press STORE
7.SelectandpressdesiredMEMORYkey
8. Replace HANDSET or press HANDSFREE/HEADSET key.
Whendialed,thisstorednumberwillPauseattheappropriateplaceinthedialingsequence.
HEARING-AID COMPATIBILITY
Providedasastandardfeatureforuserswitha”Tswitch”typehearing-aid.