Intex 28442 User Manual

Page 33
Random Display or 888
If the display is showing random numbers or all the LEDs are lit up, it is possible that there is a
problem with the panel or PCB.
In addition, restart the control base and panel.
If restart the Control Panel doesn’t work, try replacing the Control Panel with a new one.
If the above steps do not solve the issue, proceed with replacing the PCB. Refer to the section
replacing the PCB (page#37) for more details.
No
END
Random Display/ Code 888
Yes
1. Replace Control Panel
2. Replace PCB
Go Back to Next Step
Random Code?

Intex 28442 Specifications

General

Brand	Intex
Model	28442
Category	Swimming Pool
Language	English