(77IO) ZX100 AUTOMATIC POOL CLEANER ENGLISH SIZE: 4.875” X 7.25” PANTONE 295U 06/22/2022
77
A
S AVE THESE INSTRUCTIONS
Page 8
SETUP INSTRUCTIONS (continued)
5. Extend the hose (10) to the furthest opposite side of the pool wall or to the
furthest corner of the pool so that it overhangs the wall, and then cut the
excess hose with a scissor. See Fig. 5.
Note:
Unscrew (clockwise direction) the hose collar nut (9) from the other end
of the hose (10) before cutting the excess hose. Screw (counter-clockwise
direction) the hose collar nut (9) back onto the main hose (10) after cutting.
6. Brush assembly. See Fig. 6.
NOTE: Remove the brushes from underneath the device when vacuuming
large debris or leaves on the pool floor.
6
13
12
3
Press
5
Rectangular
pool/Oval pool
Circular pool
Pool inlet
Pool inlet
10
10
9
9
4
8
10
7
To Next Page
Loading...
Need help?
General
