To Next Page

To Previous Page

SETTINGS MENU

1. SOUNDS: sets various camera sounds. Use the MODE button to adjust when item is highlighted.

a) Shutter: turns “shutter” sound ON or OFF.

b) Start-up: sets the start-up sound when camera is turned ON or OFF. Choices are 1, 2, 3 and

None. Factory default is 1.

c) Beep: sets beep sound when pressing camera buttons to ON or OFF. Factory default is ON.

d) Volume: sets volume of beep sound. Choices are 0, 1, 2 and 3. Facotry default is 2.

2. BACK LIGHT: turns o LCD after a selected time even if camera is being actively used such as recording

a video. Choices are ON (LCD stays ON), 1 min, 3 min and 5 min. Press any button to turn LCD back on.

This feature conserves battery power. Factory default is ON (LCD stays ON).

3. LED: turns ON or OFF the LED indicator lights. Factory default is ON.

4: POWER SAVE: sets camera to power o after a selected time if not being actively used. Choices are

OFF (camera stays ON), 1 minute, 3 minutes and 5 minutes. Use this feature to conserve battery power.

Factory default is OFF.

5. DATE & TIME: allows current date and time and also the date format between YY/MM/DD, DD/MM/YY

and MM/DD/YY to be set. Press OK button to enter setting. Press UP or DOWN button to change number

and press MODE button to scroll to next. When done, press OK button to conrm and exit function.

6. LANGUAGE: function choices are EN (English), DE (Deutsch), IT (Italiano), ES (Español), PT (Português),

1/1HGHUODQGVDQG)5)UDQoDLV Factory default is EN (English).

7. POWER FREQUENCY: setting allows the camera to be adjusted to 60Hz or 50Hz to prevent video

ickering from uorescent lights. Factory default is 60Hz.

8. USB: allows camera’s USB port to be set for a function when connected to a computer via the

supplied micro USB cable.

The choices are:

a) MSDC: to transfer les bewteen camera and computer.

b) UVC: (USB Video device Class) to use DUB as a PC Cam.

Factory default is MSDC.

9. FORMAT: function erases all les from the microSD card. WARNING: Format will erase all data from

card. Save to a computer any les that are needed prior to formatting card!

10. RESET ALL: allows all camera settings to be reset to factory default.

While in video or photo mode, press the MENU button to

enter the menu selection screen. Quickly press and release

the MODE button to toggle between VIDEO/PHOTO menu

and SETTINGS menu (gear icon) to adjust or activate various

other functions.

DUB

Intova DUB User Manual

Other manuals for Intova DUB