To Next PageTo Next PageWhat to do if Invertek Drives DC Drives displays 'Motor Thermal Overload (I2t)'?
If the Invertek Drives DC drive displays 'Motor Thermal Overload (I2t)', check that the supply voltage is within the allowed tolerance for the drive.
Why does my Invertek Drives DC Drives show Output Over Current?
If the Invertek Drives DC drive trips due to output over current, after delivering more than 100% of the value set in P-08 for a certain time, it is designed to prevent motor damage. This can be caused by excess load or shock load on the motor.
What to do for Autotune Fault on Invertek Drives DC Drives?
If the Invertek Drives DC drive shows an Autotune Fault, where the motor parameters measured during autotune are incorrect, check the motor cable and connections for continuity.
How to fix brake channel over current on Invertek Drives ODE-3-120043-1F12?
To address a brake channel over current issue in your Invertek Drives DC drive, check the external brake resistor's condition and the connection wiring.
What does Brake resistor overload mean on Invertek Drives ODE-3-120043-1F12 DC Drives?
If the Invertek Drives DC drive indicates a brake resistor overload, it means the drive has tripped to prevent damage to the brake resistor.
How to resolve over voltage on DC bus in Invertek Drives ODE-3-120043-1F12 DC Drives?
If the Invertek Drives DC drive reports an over voltage on the DC bus, especially during deceleration or stopping, increase the deceleration time in parameter P-04. Alternatively, install a suitable brake resistor and activate the dynamic braking function using parameter P-34.
Why is my Invertek Drives ODE-3-120043-1F12 DC Drives showing 'Drive internal temperature too high'?
If the Invertek Drives DC drive reports 'Drive internal temperature too high', it means the drive's ambient temperature is too high. Ensure adequate cooling air is provided to the drive.
What causes Motor PTC thermistor trip on Invertek Drives ODE-3-120043-1F12?
If the Invertek Drives DC drive trips because of motor PTC thermistor over temperature, it means the connected motor thermistor has detected over temperature. Check the wiring connections and the motor itself.
What does Output Fault mean on Invertek Drives ODE-3-120043-1F12?
If the Invertek Drives DC drive indicates an output fault, which may be due to a missing phase or unbalanced motor phase currents, check the motor and its connections.
How to fix heatsink over temperature on Invertek Drives ODE-3-120043-1F12?
If the Invertek Drives DC drive's heatsink is overheating, ensure the ambient temperature around the drive is within the specified limits.
General| Brand | Invertek Drives |
|---|---|
| Model | ODE-3-120043-1F12 |
| Category | DC Drives |
| Language | English |
Essential safety guidelines and warnings for installation and operation of the Optidrive E3.
Step-by-step guide for initial setup and configuration of the Optidrive E3.
Schematic showing power and control terminal connections for the Optidrive.
Guidelines and requirements for proper grounding and safety earth conductor connections.
Details on selecting cables, fuses/breakers, and optional input chokes for power supply.
Guidance on connecting motors, including cable types, shielding, and length limitations.
Detailed description of default functions for control terminals 1-11.
Internal overload protection features and motor thermistor connection details.
Explanation of keypad buttons and their functions for navigation and control.
Procedure for navigating and modifying drive parameters using the keypad.
Procedures for resetting parameters to defaults and clearing drive faults.
Detailed descriptions of essential drive parameters for basic configuration and operation.
In-depth parameters for advanced control features, input/output functions, and system setup.
List of fault codes, their descriptions, and suggested remedies for resolving issues.
