Inverter Pulsar

To Next Page

To Previous Page

Pulsar extractor fan | Installation and operation instructions

Trademarks, copyrights and property rights

inVENTer

is a protected trademark of inVENTer GmbH.

The copyright to this document remains with the manufac-

turer. Rights to all content and images:

All trademarks used in this document are the property of

their respective manufacturers and hereby acknowledged.

Disclaimer

This documentation represents a translation of the original

german installation and operation instructions.

After completion of the installation the information

regarding access to these installation instructions must be

handed over to the user (tenant, owner, property manage-

ment; etc).

The contents of this documentation have been checked

for conformity with the hardware and software described.

Nevertheless, deviations cannot be excluded, so that no

guarantee can be given for complete conformity.

This documentation describes the functionality of the

standard scope. For reasons of clarity, the documentation

does not purport to cover all details on all types of the

product and cannot cover every conceivable scenario for

installation, assembly, operation, cleaning and mainte-

nance. The illustrations in this documentation may di󰀨er

slightly from the design of the product that you have

purchased. The same functionality is ensured despite any

design deviations.

Inverter Pulsar - Page 2