To Next PageTo Next Page
Need help?Do you have a question about the INVT BD5KTL-RL1 and is the answer not in the manual?
General| Model | BD5KTL-RL1 |
|---|---|
| Rated Output Power | 5000W |
| Rated AC Power | 5000W |
| AC Voltage Range | 180-280V |
| THDi | <3% |
| DC Connection | MC4 |
| Protection Degree | IP65 |
| Cooling Method | Natural Convection |
| Number of MPP Trackers | 2 |
| Rated AC Voltage | 220/230V |
| Operating Temperature Range | -25°C to +60°C |
| Output Frequency | 50Hz/60Hz |
| Humidity | 0-100% |
Critical safety warnings and instructions for safe operation and maintenance of the inverter.
Proper PE connection, leakage current monitoring, and RCD requirements for safe operation.
Essential safety precautions for working with high-voltage batteries and accumulator batteries.
Technical specifications for the DC input parameters, including voltage and current ratings.
Technical data for AC connections and EPS output, including power and current ratings.
Guidelines for safe inverter mounting, site selection, and step-by-step installation instructions.
Details on required installation space and step-by-step guide for mounting the inverter.
Detailed instructions for connecting PV modules to the inverter, including voltage limitations.
Guidance on connecting the inverter to the grid, including recommended cable sizes and micro-breakers.
Instructions for connecting the EPS function, detailing I and E versions and auto/manual operation.
Steps for EPS wiring and guidelines for connecting loads to the EPS output.
Guidance on battery breaker installation, connection diagrams, and BMS PIN definitions.
Procedure for starting the inverter, checking its status, and initial setup.
Guidance on setting the inverter based on local grid, PV input, and battery type for various work modes.
Setting work modes like peak shifting, self-consumption, and battery priority with time configurations.
Main menu for various configuration options, including system, battery, and grid settings.
Configuration of work modes, EPS enabling, and battery wake-up settings.
Interface for selecting various battery parameters, including type, depth of discharge, and charge current.
Selection of the grid standard, including voltage and frequency options (e.g., 220V/50HZ).
Comprehensive table listing common inverter fault codes, their descriptions, and recommended solutions.
