Need help?Do you have a question about the INVT BD-RH1 Series and is the answer not in the manual?
General| Output Voltage | 0V to input voltage |
|---|---|
| Cooling Method | Forced air cooling |
| Enclosure Rating | IP20 |
| Output Frequency | 0~600Hz |
| Control Mode | V/F control |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overheat, Short Circuit |
| Communication | Modbus-RTU |
| Overload Capacity | 150% for 60 seconds |
| Ambient Temperature | -10°C to +40°C (derating above 40°C) |
| Storage Temperature | -20°C to +60°C |
| Humidity | Less than 95%RH, no condensation |
| Altitude | Up to 1000 meters without derating |
| Input Voltage | Three-phase 380V-480V |
To Next Page