INVT GD300-075G-4 - Page 140

Goodrive300 Series VFD Basic operation instruction
135
Note: Bigger the set value, more effective the control. If the set value is too big, overcurrent may
occur to the motor.
5. User-defined V/F curve (V/F seperation) function
V /F curve
Linear V/F curve
Multi-dots V/F curve
Self-defined V/F curve
2.0th power of torque V/F curve 1.7th power pf torque V/F curve 1.3th power of torque V/F curve
PWM output
Frequency setting
Voltage setting
P04.29 voltage ACC time P04.30 voltage DEC time
P04.31 output Max. voltage
P04.32 output Mini voltage
P00.11 ACC 1
P00.12 DEC 1
P00.04 upper limit of the
running frequency
P00.05 lower limit of the
running frequency
P04.00 motor 1V/F curve setting
0 1 2 3 4 5 6 7 8 9
10
Keypad
AI1
PROFIBUS/CANopen
MODBUS
PID
Multi-stage speed
HDI
AI3 AI2
Erthernet
CAN
P04.27(voltage setting
channel selection)
Keypad setting
voltage
P04.28
0 1 2 3 4 5 6 7 8 9
10 11
Keypad
AI1
PROFIBUS/CANopen
MODBUS
PID
Multi-stage speed
Simple PLC
HDI
AI3 AI2
Erthernet
CAN
P00.06
（A frequency command selection）
Keypad setting frequency
P00.10
0 1 2 3 4 5