INVT GD300-2R2G-4 - Page 83

Goodrive300 Series VFD Function parameters
78
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
P06 Group Output terminals
P06.00
HDO output
The function selection of the high-speed pulse
output terminals.
0: Open collector high speed pulse output: The
Max.pulse frequency is 50.0kHz. See
P06.27–P06.31 for detailed information of the
related functions.
1: Open collector output. See P06.02 for detailed
information of the related functions.
0
◎
P06.01
Y1 output
0: Invalid
1: In operation
2: Forward rotation operation
3: Reverse rotation operation
4: Jogging operation
5: The VFD fault
6: Frequency degree test FDT1
7: Frequency degree test FDT2
8: Frequency arrival
9: Zero speed running
10: Upper limit frequency arrival
11: Lower limit frequency arrival
12: Ready for operation
13: Pre-magnetizing
14: Overload pre-alarm
15: Underload pre-alarm
16: Completion of simple PLC stage
17: Completion of simple PLC cycle
18: Set count value reached
19: Specified count value reached
20: External fault valid
21: Length arrival
22: Running time arrival
23: Modbus communication virtual terminals
output
24: PROFIBUS/CANopen communication virtual
terminals output
25: Ethernet communication virtual terminals
0
○
P06.02
HDO output
0
○
P06.03
Relay RO1
output
1
○
P06.04
Relay RO2
output
5
○