INVT GD300-5R5G-4 - Page 114

Goodrive300 Series VFD Function parameters
109
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
Actual detection
value
t1
t2
t1<t2, so the VFD continues to work
t2=P11.15
In running
Fault output dEu
Speed
Set detection
value
Time
Setting range of P11.15: 0.0–10.0s
P11.16
Automatic
frequency-dec
reasing at
voltage drop
0: Invalid
1: Valid; ensure rated output torque when voltge
drop
0
○
P12 Group Motor 2
P12.00
Motor type 2
0: Asynchronous motor
1: Synchronous motor
Note: Switch the current motor by the switching
channel of P08.31.
0
◎
P12.01
Rated power
of
asynchronous
motor 2
0.1–3000.0kW
Set the parameter of the
controlled asynchronous
motor.
In order to ensure the
controlling performance, set
the P12.01–P12.05 according
to the name plate of the
asynchronous motor.
Goodrive300 series VFDs
provide the function of
parameter autotuning. Correct
parameter autotuning comes
from the correct setting of the
motor name plate.
In order to ensure the
controlling performance,
please configure the motor
according to the standard
principles, if the gap between
Depend
on
model
◎
P12.02
Rated
frequency of
asynchronous
motor 2
0.01Hz–P00.03
(Max. frequency)
50.00
Hz
◎
P12.03
Rated speed
of
asynchronous
motor 2
1–36000rpm
Depend
on
model
◎
P12.04
Rated voltage
of
asynchronous
motor 2
0–1200V
Depend
on
model
◎
P12.05
Rated current
of
asynchronous
0.8–6000.0A
Depend
on
model
◎