INVT Goodrive300-01A Series User Manual

• D

  dallisonAug 25, 2025

  How to fix inverter unit U phase protection in INVT Goodrive300-01A DC Drives?

  

  Same questionReply

  • P

    Paul KennedyAug 26, 2025

    If your INVT DC Drive displays an inverter unit U phase protection error, it could be due to several reasons. The acceleration might be too fast; try increasing the acceleration time. There could be internal damage to the IGBT of that phase, requiring a power unit replacement. Improperly connected drive wires could also be the cause, so check the wiring. Finally, strong interference from peripheral equipment might be the culprit; investigate and eliminate any interference sources.

    

    Reply
• R

  Raymond RamirezAug 25, 2025

  Why is there overvoltage at acceleration in INVT Goodrive300-01A?

  

  Same questionReply

  • M

    mark89Aug 25, 2025

    If your INVT DC Drive is experiencing overvoltage during acceleration, the input voltage might be abnormal, so check the input power. Alternatively, there might be large energy feedback. In this case, verify if the deceleration time of the load is too short or if the motor starts during rotation. Installing dynamic brake units might also be necessary.

    

    Reply

INVT Goodrive300-01A Series Specifications

General

Brand	INVT
Model	Goodrive300-01A Series
Category	DC Drives
Language	English

Related product manuals

INVT Goodrive350 Series

341 pages

INVT Goodrive200A Series

182 pages

INVT Goodrive100-PV Series

89 pages

INVT GD20-011G-4

140 pages

INVT GD20-1R5G-4

140 pages

INVT GD20-055G-4

140 pages

INVT GD20-030G-4

140 pages

INVT GD20-0R4G-S2

140 pages

INVT GD300-2R2G-4

289 pages

INVT GD350-2R2G-4

341 pages

INVT GD20-2R2G-S2

140 pages

INVT GD350-7R5G-4

341 pages