INVT Goodrive300-01A Series

INVT Goodrive300-01A Series

97 pages

To Next Page

To Next Page

Loading...

Table of Contents

Questions and Answers:

J
Jonathan CrossSep 2, 2025
How do I fix a motor autotuning fault on INVT Goodrive300-01A DC Drives?
- R
  Robert GordonSep 2, 2025
  If your INVT DC Drive is experiencing a motor autotuning fault, the motor capacity might not match the VFD capacity, so change the VFD model. The motor parameters might be set improperly; set the motor type and nameplate parameters correctly. Finally, if the deviation between the parameters obtained from autotuning and the standard parameter is huge, empty the motor load and identify again.
S
Stephanie MoranSep 3, 2025
What causes EEPROM operation fault in INVT Goodrive300-01A DC Drives?
- S
  Sarah PalmerSep 3, 2025
  If your INVT DC Drive displays an EEPROM operation fault, it could be due to an error that occurred while writing/reading control parameters. Try pressing STOP/RST to reset the system. Alternatively, the EEPROM might be damaged, requiring replacement of the main control board.
A
Austin WilliamsSep 4, 2025
Why is there a PID feedback offline fault on my INVT Goodrive300-01A DC Drives?
- C
  Connor DunnSep 4, 2025
  If your INVT DC Drive is showing a PID feedback offline fault, it indicates that the PID feedback is offline. Check the PID feedback signal wire. Also, the PID feedback source might have disappeared, so check the PID feedback source.
S
Sarah TylerSep 5, 2025
How to troubleshoot keypad communication fault in INVT Goodrive300-01A?
- M
  Matthew ObrienSep 5, 2025
  If your INVT DC Drive reports a keypad communication fault, it could be due to a poorly contacted or disconnected keypad wire. Check the keypad wire and confirm whether a fault exists. The keypad wire might be too long and suffering from strong interference; check the environment and rule out any interference source. Alternatively, the keypad or communication circuit could be faulty, requiring hardware replacement and maintenance service.
K
Kayla AdamsSep 6, 2025
What to do if parameter upload error occurs in INVT Goodrive300-01A DC Drives?
- R
  Russell HenrySep 6, 2025
  If your INVT DC Drive is experiencing a parameter upload error, it could be due to a poorly contacted or disconnected keypad line. Check the environment and rule out the interference source. The keypad wire might be too long or suffering from strong interference; replace the hardware and ask for maintenance service. Alternatively, the keypad or mainboard communication circuit could be faulty, requiring hardware replacement and maintenance service.
C
Caitlin MooreSep 6, 2025
How to fix parameter download error on INVT DC Drives?
- T
  trevor26Sep 7, 2025
  If your INVT DC Drive is experiencing a parameter download error, it could be due to a poorly contacted or disconnected keypad line. Check the environment and rule out the interference source. The keypad wire might be too long or suffering from strong interference; replace the hardware and ask for maintenance service. Alternatively, the storage data in the keypad could be wrong, so re-copy the data in the keypad.

INVT Goodrive300-01A Series Specifications

General

Brand	INVT
Model	Goodrive300-01A Series
Category	DC Drives
Language	English

Related product manuals

Preview: INVT Goodrive350 Series

INVT Goodrive350 Series

Preview: INVT Goodrive200A Series

INVT Goodrive200A Series

Preview: INVT Goodrive100-PV Series

INVT Goodrive100-PV Series

INVT GD20-011G-4

INVT GD20-1R5G-4

INVT GD20-055G-4

INVT GD20-030G-4

INVT GD20-0R4G-S2

INVT GD300-2R2G-4

INVT GD350-2R2G-4

INVT GD20-2R2G-S2

INVT GD350-7R5G-4