INVT Goodrive300 Series User Manual

Goodrive300 Series VFD Function parameters
46
Function
code
Name
Detailed instruction of parameters
Default
value
Modify
the reverse direction. FWD/REV indicator is on.
Modify the function code to shift the rotation
direction of the motor. This effect equals to the
shifting the rotation direction by adjusting either
two of the motor lines (U, V and W). The motor
rotation direction can be changed by QUICK/JOG
on the keypad. Refer to parameter P07.02.
Note: When the function parameter comes back
to the default value, the motor’s running direction
will come back to the factory default state, too. In
some cases it should be used with caution after
commissioning if the change of rotation direction
is disabled.
2: Forbid to run in reverse direction: It can be
used in some special cases if the reverse running
is disabled.
P00.14
Carrier
frequency
setting
Carrier
frequency
Electromagnetic
noise
Noise and leakage
current
Heating
eliminating
High
LowHigh
Low
High
Low
1kHz
10kHz
15kHz
Relationship between models and carrier
frequencies
Model
The factory value
of carrier
frequency
380V
1.5–11kW
8kHz
15–55kW
4kHz
Above 75kW
2kHz
500V
4–11kW
8kHz
15–55kW
4kHz
Above 75kW
2kHz
660V
22–55kW
4kHz
Depend
on
model
○

INVT Goodrive300 Series Specifications

General

Brand	INVT
Model	Goodrive300 Series
Category	DC Drives
Language	English