ION PATHFINDER GO User Manual

ION Audio Pathfinder
TM
Go User Guide 12
Stereo-Link
TM
: Syncing Two Speakers
If you would like to play music from a Bluetooth device, you can first “link” two Pathfinder
TM
Go speakers together in order to listen to your music in stereo. One Pathfinder
TM
Go will serve
as the left speaker and the other will serve as the right speaker.
Note: Pathfinder
TM
Go can also be linked with ION Audio Pathfinder
TM
320° speakers.
T
o link two Pathfinder
TM
Go speakers together:
Note: When you begin the Stereo-Link
TM
process, any connected Bluetooth devices will be
automatically disconnected. You can also disconnect your device prior to beginning by
double-pressing the Bluetooth button.
1. Press and hold the S
tereo-Link
TM
/ Repeat button on both speakers to enter Stereo-Link
TM
mode. You will hear a tone and the S
tereo-Link
TM
and Bluetooth icons on each speaker’s
D
isplay will begin flashing while they search for each other.
Note: The linking process can take up to 30 seconds to complete. The closer the two
speakers are to each other, the quicker the link is established.
Once the speakers are linked, the S
tereo-Link
TM
icons on each speaker’s Display will be lit
solid.
2. Press and release the B
luetooth button on either speaker to select Bluetooth mode and
begin the Bluetooth pairing process. The speaker you use for Bluetooth pairing will serve
as the primary speaker. The B
luetooth icon on the primary speaker’s Display will flash to
indicate it is searching for a Bluetooth device to pair with.
3. Navigate to your Bluetooth device’s setup screen, find P
ATHFINDER GO, and connect.
When the connection is successful, you will hear "Bluetooth Connected" from the primary
speaker (if voice prompts are enabled), and the B
luetooth icon on the Display will be lit solid.
When audio playback begins, you should hear it through both speakers. The primary
speaker will play the left channel while the secondary speaker plays the right channel.
Playback controls are active on both speakers.
1 - PRESS AND HOLD
3 - PRESS
(primary speaker)
2 - PRESS AND HOLD
4
PATHFINDER
TM
GO
(speaker 1 & 2)

ION PATHFINDER GO Specifications

General

Power Output	50W
Water Resistance	IPX5
Bluetooth	Yes
Built-in Microphone	Yes
USB Charging Port	Yes
Inputs	1/8-inch (3.5mm) aux input
Bluetooth Range	Up to 100 ft (30.5 m)