ION PATHFINDER GO User Manual

ION Audio Pathfinder
TM
Go User Guide 15
USB Playback Mode
When a USB drive with compatible files is inserted into the U
SB-A Playback / Device
C
harging Port, Pathfinder
TM
Go will automatically switch to USB mode. If the USB drive has
already been inserted and you are using another mode, press the S
ource button until USB
mode is selected.
Pathfinder
TM
Go will automatically play the first compatible MP3 file. Files are played in
alphabetical order of what is on the root level, then alphabetical by folder, and then
alphabetical by track name. Media playback will stop when all media has been played on the
USB drive.
Note: The USB drive must have playable MP3 files for it to appear on the media panel’s display.
While in USB playback mode, you can use the following buttons on the front panel to control
playback:
• Press the P
lay/Pause button to start or stop USB playback.
• Press the P
revious and Next buttons (</>) to skip to the previous or next USB track. Press
and hold these buttons to fast forward or rewind within the track.
• Press the S
tereo-Link
TM
/ Repeat button to cycle through the repeat/shue options
(abbreviations will show on the display):
o Play the current USB track on repeat (O
nE). This is the default mode when powered
on.
o Play the tracks in random order (r
An).
o Play all the tracks on the USB drive on repeat (A
LL).
o Play the current folder’s tracklist on repeat (F
OLd). The folder used is based on what
song is playing when it is activated. For instance, if a song playing is on the root level,
selecting FOLd will repeat only songs at the root level. If a song is in folder “A”, then
only songs in folder “A” will be repeated.
1 - CONNECT
PRESS
PRESS
(Play/Pause Playback)
PRESS TO CYCLE
(OFF, ALL, FOLDER, ONE, RANDOM)
PRESS
(Previous/Next Track)

ION PATHFINDER GO Specifications

General

Power Output	50W
Water Resistance	IPX5
Bluetooth	Yes
Built-in Microphone	Yes
USB Charging Port	Yes
Inputs	1/8-inch (3.5mm) aux input
Bluetooth Range	Up to 100 ft (30.5 m)