IONPURE IP-VNX-MAX-1 User Manual

IONPURE
®
VNX CEDI Modules
Page 7 IP-MAN-VNX-1019-EN.pdf
1. INTRODUCTION
1.1. VNX55 Product Family Overview
Ionpure VNX modules are the highest flow rate CEDI devices available. Their compact
state-of-the-art design assures ease of installation, maintenance, and service. VNX
modules are available in the following sizes:
Model Number Nominal Flow Description
IP-VNX-MINI-1 52.8 gpm (12 m
3
/h) Small footprint, enhanced performance
IP-VNX-MAX-1 66 gpm (15 m
3
/h) High flow, enhanced performance
IP-VNX28EP-2 27.5 gpm (6.25 m
3
/h) Enhanced performance
IP-VNX55EP-2 55 gpm (12.5 m
3
/h) Enhanced performance
IP-VNX55E-2 55 gpm (12.5 m
3
/h) Microelectronics, polishing loop
IP-VNX55EX-2 55 gpm (12.5 m
3
/h) Microelectronics, makeup
IP-VNX55HH-2 55 gpm (12.5 m
3
/h) High hardness
IP-VNX15CDIT-2 15 gpm (3.4 m
3
/h) Thin cell
IP-VNX30CDIT-2 30 gpm (6.8 m
3
/h) Thin cell
For more information on the VNX module specifications and flow rates, see Section 2.4
and Appendix A of this Manual.
Figure 1-1: Angle and Side views of VNX Modules

IONPURE IP-VNX-MAX-1 Specifications

General

Brand	IONPURE
Model	IP-VNX-MAX-1
Category	Control Unit
Language	English