IOtech 640 - Configuring Ethernet Models 640 e & 650 e; System Requirements; Software Installation; Ethernet Connection and System Power-up

640 & 650 Series 947291 Configuring Ethernet Models 640e & 650e 4-1
Configuring Ethernet Models 640e & 650e 4
System Requirements …… 4-1
Software Installation …… 4-2
Ethernet Connection and System Power-up …… 4-3
Connecting Data Acquisition Signal Lines …… 4-14
Purchased software packages such as eZ-Analyst and eZ-TOMAS are shipped with a
license key. Keep your key(s) in a safe place. You will need to enter them during the
initial run of your purchased software.
System Requirements
Before setting up the hardware or installing the software, verify that you have the following items.
640e or 650e
TR-2U Power Supply
Ethernet Patch Cable
Ethernet jack [on PC or on a hub connected to the Ethernet]
Dynamic Signal Analysis CD
License Keys for purchased software;
e.g., eZ-Analyst, eZ-TOMAS, eZ-Balance, eZ-NDT
Monitor: SVGA, 1024 x 768 screen resolution
Windows 2000 SP4 and Windows XP users:
PC with Intel
™
Pentium, 1 GHz or equivalent;
512 MB memory; 10 GB disk space
Windows Vista users:
PC must be Windows Vista Premium Ready