IOtech 640 - Configuring USB Models 640 u & 650 u; System Requirements; Software Installation; USB Connection and System Power-up

640 & 650 Series 889793 Configuring USB Models 640u & 650u 5-1
Configuring USB Models 640u & 650u 5
System Requirements …… 5-1
Software Installation …… 5-2
USB Connection and System Power-up …… 5-3
Connecting Data Acquisition Signal Lines …… 5-6
Purchased software packages such as eZ-Analyst and eZ-TOMAS are shipped with a
license key. Keep your key(s) in a safe place. You will need to enter them during the
initial run of your purchased software.
System Requirements
Before setting up the hardware or installing the software, verify that you have the following:
• 640u or 650u
• USB Cable
• Dynamic Signal Analysis CD for 600 Series Devices
• License Keys for purchased software; e.g., eZ-Analyst, eZ-TOMAS, eZ-Balance, eZ-NDT
• Computer that meets or exceeds the following:
o Intel
™
Pentium, 1 GHz or equivalent
o Microsoft
®
Windows XP, 2000, or Vista Operating System
o USB2.0 port
o 512 MB memory
o 10 GB disk space
• Monitor: SVGA, 1024 x 768 screen resolution