EasyManua.ls Logo

IOtech 640 - Dedicated Network - making use of a network hub or switch; LAN with a DHCP Server

IOtech 640
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
640 & 650 Series 947291 Configuring Ethernet Models 640e & 650e 4-5
Dedicated Network - making use of a network hub or switch
In this scenario the 640e or 650e connects to the Ethernet through a network hub or switch. At least one
computer is also connected to the hub.
Dedicated Network using a Hub/Switch
Some network devices such as a wireless access point may act as a DHCP server. If this is
the case, follow the instructions for the LAN with a DHCP server. For detailed information
consult the documentation that is specific to your network device.
LAN with a DHCP Server (Local Area Network with a Dynamic Host Configuration Protocol server)
Many corporations use the LAN/Server with DHCP arrangement for their networks. In this type of setup
several computers are typically connected to a network that makes use of a DHCP server. In addition, a
640e or 650e is connected to the network hub/switch.
LAN with a DHCP Server
Notes:
Using a 640e or 650e on a typical LAN may affect the speed of the network and internet data
transfer. Because of this we recommend adding a network card to the computer and using one of
the two dedicated network configurations.
Contact your network administrator before connecting a 640e or a 650e to a corporate network.

Related product manuals