c
CORNERMATIC PLUS
WARNING LABELS
Warning and safety related informational labels are placed on the Iowa Precision Industries’
equipment at strategic points. It is important that these labels are not removed, covered,
hidden, or defaced. The purpose of these labels is to alert personnel to potential personal
injury hazards or other direct or indirect safety concerns.
DANGER indicates an imminently hazardous situation which, if not
avoided, will result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not
avoided, could
result in minor or serious injury.
CAUTION indicates a potentially hazardous situation which, if not
avoided, may
result in minor or moderate injury.
NOTICE indicates a company policy that relates directly or indirectly
to the safety of personnel or protection of property.
“It is important that the meaning of a safety sign is clearly understood
by those who may come in contact with the hazard. To increase the understanding of a safety sign’s
components, the ANSI Z535 committee encourages safety sign manufacturers and owners of
facilities to publish and exhibit the following (above) information on safety posters, safety bulletins or
the like. Doing so will assist in the objective of achieving a national uniform system for the
recognition of potential personal injury hazards and accident prevention.” - ANSI Z535.2, Annex A1
H. WEISS MACHINERY & SUPPLY
H. WEISS MACHINERY & SUPPLY
PHONE: (718) 605-0395 - www.hweiss.com
To Next Page
Loading...