40
Modifying a Rule
1. Log in to the AC's web UI and go to Network Setting > Network Setting > NAT Rule.
2. On the "Virtual Server" section, find the rule to be modified.
3. If you want to disable/enable a rule, click the button / on the "Status" column. If you want to
edit a rule, click the button on the "Action" column.
Deleting a Rule
1. Log in to the AC's web UI and go to Network Setting > Network Setting > NAT Rule.
2. On the "Virtual Server" section, find the rule to be deleted and click on the "Action" column.
Configuring DMZ Host
By default, this function is disabled on the AC.
To enable a DMZ host:
1. Log in to the web UI of the AC, go to Network Setting > Network Setting > NAT Rule, and find
"DMZ Host" section.
2. On the WAN interface to enable the DMZ host function, click Enable.
3. IP Address: Enter the IP address of the local host that needs to be a DMZ host.
4. Save your settings.
To Next Page
Loading...