45
Configuration Tip
After you complete the virtual server configuration, if internet users still cannot access the web server,
you can successively try the following ways to solve your problem.
Ensure that the AC obtains a public IP address on the WAN0 interface and the local port
configured in the virtual server rule is the port of the web server.
Disable the system firewall, anti-virus programs, and security guards on the web server because
they may prohibit internet users to access the web server.
Manually configure the IP address of the web server. If no, the web server may dynamically obtain
a changeable IP address, which can cause server interrupt.
Example of DMZ Host
Networking Requirement
A hotel has established a network using AC3000. The AC is connected to the internet and provides
internet access for local users. The hotel has a local web server which needs to be accessed by internet
users, especially the hotel employees on a business trip.
To meet the requirements, you can use the DMZ host function of the AC.
To Next Page
Loading...