88
2. Configure the DHCP server used to communicate with the Router2
1) Choose Network Setting > Network Setting > Interface and DHCP Server.
2) Click Add.
3) Configure the parameters in the window.
VLAN Interface: In this example, select "vlan200".
IP Address: Set an IP address for the VLAN interface that is on the network segment of the LAN
IP address of Router2, such as "192.168.200.1".
Subnet Mask: You can keep the default value.
4) Click Save.
Step 3: Configure Internet Settings
1. Log in to the web UI of the AC and go to Network Setting > Network Setting > Internet Settings.
To Next Page
Loading...