1000i Series Quick Installation Guide
Before Starting
1000i Series Phone, Stand, Handset and Handset cord, 1.5m CAT5E Ethernet cable
Quick Installation Guide, Number plates (1020i)
Installation
PoE Class 2: 1010i,1020i, 1030i, PoE Class 3: 1040i, 1050i
CAUTION: Use either PoE or AC Adapter, not both, for power supply of your phone
1)
2)
3)
NOTE: Please read "Information about compatibility headset" before
connecting the headset to ensure safe and proper use.
4)
5)
NOTE: If you plug in or unplug the USB headset during a call, it will operate from the next call. The USB and EHSA
headset cannot be used together, only one item must be connected.
1)
2)
3)
4)
NOTE: Skip the following procedures from 5) to 6) if PoE is used for power supply of your phone.
5)
6)
1)
2)
3)
NOTE: If you install the phone on a wall, do not attach the stand.
NOTE: When mounting on a wall, it is necessary to remove the stand from the bottom of the phone, and sleeve of the
LAN Ethernet cable should be moved backward to prevent it protrude.
1)
2)
3)
4)
5)
To Next Page
Need help?
General
