iPECS eMG80
System DECT Installation Guide Issue 1.3
21
3.5 Ferrite Core Installation and Wiring
Ferrite core is provided in the packaging of the Base Station for EMI. The Ferrite core should be
installed when the WTIB4 is installed in the system. One Ferrite core is to be used with the line
cord between the Base Station and each port of WTIB4 (as shown).
Figure 3.5-1 Cable connection with Ferrite Core between WTIB4 and Base Station
Figure 3.5-2 Wiring with connection tab between WTIB4 and Base Station
CAT5 cable is provided by Ericsson-LG
Enterprise, twisted 2-pair or CAT3 cable
To Next Page
