iPECS eMG80 - Enable Subscription

iPECS eMG80
System DECT Installation Guide Issue 1.3
30
4.1 Enable Subscription
For security and control, handset subscription must be authorized, and enabled. Once enabled,
the User can subscribe the DECT handset.
To enable a subscription from the Attendant, perform the following procedure:
1. Press the [PGM] button.
STATION 100 (T)
04 SEP 01 02:49 PM
2. Dial 0 and #.
3. Press Flex button 1.
WTU (UN) SUBSCRIBE
PRESS FLEX BUTTON
4. Enter the Station number of the subscribing Station.
WTU SUBSCRIBE ENABLE
ENTER STA NO.
5. Enter the Type of Handset,
STATION : XXX
ENTER PHONE TYPE
 2 – Standard DECT GAP
 3 – GDC-400H/450H
 5 – GDC-480H/500H
6. Press [HOLD/SAVE] button and await Success message.
7. Press Speaker to return to idle.