iPECS eMG80 - RSSI Monitoring

iPECS eMG80
System DECT Installation Guide Issue 1.3
28
3.6.6 RSSI Monitoring
Received Signal Strength Indicator (RSSI) Monitoring is a way that the dealer can install Base
Stations without using the CRS tool. The RSSI level of a Base Station to which the wireless
terminal is locked is displayed as a “dBm" value on the LCD (up to 80dbm.); the value is updated
periodically. The handset must be subscribed for this function to work.
To use RSSI Monitoring when using a GDC-480H/GDC-500H wireless terminal:
1. From the wireless terminal.
2. Press the [Menu] button.
3. Press the * key.
4. Enter the Technician menu by entering press PIN code (L G G A P = 5 4 4 2 7).
5. Press [OK] button.
6. Select the [CELL TOOL] mode to YES and press the [OK] button.
7. The RSSI value will display on LCD of wireless terminal (automatically updated
periodically).