iPECS LIP-8002E - Answering Calls to Other Stations

LIP-8002E/2AE User Guide
7
In iPECS-MG
To download a Ring Tone from System memory:
• Press TRANS/PGM,
• Dial 2 for Ring Tones,
• Dial 3 for Ring Tone download,
• Dial the phone’s memory location to receive the tone (5-8),
• Dial 0-9 for the desired tone number; a sample tone is played
downloading the selected one.
• Press HOLD to download and a confirmation tone is heard.
To select a Ring Tone from phone memory:
• Press the TRANS/PGM button,
• Dial 2 for Ring Tones,
• Dial 1 or 2 for Internal or External ring,
• Dial 1-8 for the desired tone number; a sample tone is heard,
• Press HOLD to make the selection
2.4 Answering Calls to Other Stations
When nearby stations are ringing, you may pick-up
(answer) the call. Select to answer a call ringing at a
specific station (Directed Call Pick-Up) or you may
choose to answer the oldest call ringing to your station
group (Group Call Pick-Up). Assign a Flex button with
the Group Call Pick-Up code for one-touch access.
NOTE—Pick-Up will not answer calls on the ringing
station Private Line unless the line appears on your
phone.
To answer a call ringing at another station:
• Lift the handset,
• Dial Directed Call Pick-Up code,
• Dial the Intercom Number of the ringing station; call is
connected.
To answer a call ringing at a station in your group:
• Lift the handset,
• Dial Group Call Pick-Up code, the call is connected.