RETURN UNKNOWN
Message 6: CALL (enter up to 17 digits)
Message 7: IN OFFICE STA xxxx
Message 8: IN MEETING
RETURN AT TIME hh:mm
Message 9: AT HOME
Message 0: AT BRANCH OFFICE
Message *: User Custom Message
#: Deactivate
In iPECS-LIK
To activate Custom or Pre-Defined Message Forward:
• Press TRANS/PGM,
• Dial User Program feature code 51,
• Dial the two-digits text Message code
(01-10: Pre-Defined, 00: Customer),
• Dial any auxiliary input for messages 01-04 and 06-08,
• Press HOLD, forward confirmed.
To cancel activated Message:
• Press TRANS/PGM,
• Dial User Program feature code 51,
• Dial # and Press HOLD
To program the Station Custom Message (00) at your station:
• Press TRANS,
• Dial User Program feature code 52,
• Enter Message contents, up to 24 characters, using the
following Character Entry Chart:
To Next Page
Loading...
