iPECS LIP-8002E - Page 39

LIP-8002E/2AE User Guide
33
In iPECS-LIK, iPECS SBG-1000
To register a mobile phone number: (iPECS-LIK)
• Press the TRANS/PGM button,
• Dial 37,
• Dial the mobile phone number,
• Press the HOLD button.
To activate a registered mobile phone: (iPECS-LIK)
• Press the TRANS/PGM button,
• Dial 38,
• 1 to activate, 0 to deactivate,
• Press the HOLD button.
To place a call from the mobile extension using the iPECS System:
• Dial the ISDN DID number of the station; the system will
check the Caller ID and answer the call. The user then will
receive intercom dial tone,
• Place internal or external iPECS call as normal.
To Transfer a call from the mobile extension using the iPECS:
• Dial * while on an iPECS call,
• Dial the desired extension, the call is transferred and the
mobile phone returns to idle.
In iPECS-MG
To register a mobile phone number:
• Press the TRANS/PGM button,
• Dial 51,
• Select Mobile Index 1 or 2,
• 1 to activate, 0 to deactivate,
• Press the HOLD button.
To activate a registered mobile phone from the user’s station:
• Press the TRANS/PGM button,
• Dial 52,
• Select Mobile Index 1 or 2,
• Dial the mobile phone number with CO Access code,
•
Press the
HOLD
button.