iPECS LIP-8002E - Push-To-Talk (PTT) Page

LIP-8002E/2AE User Guide
36
In iPECS-LIK, iPECS SBG-1000
To make a page:
• Lift the handset,
• Dial Page zone code,
• If assigned, after page warning tone, make announcement.
To answer a Meet-me-Page:
• Lift the handset.
• Dial Meet-Me-Page code.
In iPECS-MG,
To make a page:
• Lift the handset,
• Dial Page code and the desired Page zone,
• If assigned, after page warning tone, make announcement.
To answer a Meet-me-Page:
• Lift the handset.
• Dial 546(Meet-Me-Page code).
7.3 Push-To-Talk (PTT) Page (iPECS-LIK, iPECS-MG)
iPECS Phones can be assigned as a member of one or
more of the system’s nine Push-To-Talk (PTT) page
groups. Users separately log-in or log-out of any one or
all PTT groups to which the phone is assigned. Once
logged in, place or receive one-way page
announcements to/from other users who are logged in
to the same PTT group.
In iPECS-LIK
To log-in to a PTT group:
• Dial the PTT Log-in/out code.
•
Dial the desired PTT group number (1-9, 0 ).