Disclaimer Notice
© IPG Photonics Corporation 2015. All rights reserved. You
may not copy, reproduce, transmit, store in a retrieval
system or adapt this publication, in any form, in any media
or by any means, without the prior written permission of IPG
Photonics Corporation (IPG), except as allowed under
applicable copyright laws. Permitted copies shall bear the
same copyright and proprietary notices which were
contained on the original version.
This User Guide is provided “as is” and is subject to change
and revision without notice. IPG believes that the
information provided is accurate and reliable; however IPG
makes no warranty or representation, express or implied,
regarding this document, including without limitation any
implied warranties of merchantability or fitness for a
particular use, purpose or application, either alone or in
combination with any other device, equipment, apparatus,
materials or process. Users must take full responsibility for
their application of any products.
Further, IPG does not assume responsibility for use of the
information contained in this document or for any
infringement of patents or other rights of third parties that
may result from its use. IPG shall not be liable for errors in
or omissions from this document or for any incidental,
consequential, indirect or special damages, including
without limitation, lost profits, lost production costs or similar
damages, in connection with the furnishing, performance or
use of this material.
IPG grants no license, directly or indirectly, under any patent
or other intellectual property rights from use of the
information provided herein.
IPG, IPG Photonics and the IPG Logo are registered
trademarks of IPG Photonics Corporation. IPG has
identified words that are considered trademarks. Neither
the presence nor absence of trademark identifications
affects the legal status of any trademarks.
Patent Rights
This product is patented. See the product for more
information.
US Export Control Compliance (for US products
only)
IPG is committed to complying with U.S. and foreign export,
import and customs requirements. Export and re-export of
lasers and other products manufactured by IPG are subject
to U.S. and foreign laws and regulations, including the US
Export Administration Regulations administered by the
Department of Commerce, Bureau of Industry and Security.
The applicable restrictions vary depending on the specific
product involved, intended application, the product
destination and the intended user. In some cases, an
individual validated export license is required from the US
Department of Commerce prior to resale or re-export of
certain products.
You are ultimately responsible for exporting any IPG product
in accordance with the Export Administration Regulations
and the U.S. Customs and Border Protection Regulations.
IPG recommends that you obtain your own legal advice
when attempting to export. All export and custom
classifications and information provided by IPG is subject to
change without notice. IPG makes no representation as to
the accuracy or reliability of the classification information
provided. The stated classification only applies to
equipment as it left the IPG factory. Any modifications or
changes after leaving the IPG facility will be your
responsibility to obtain further classifications. IPG is in no
way responsible for any damages whether direct,
consequential, incidental, or otherwise, suffered by you as
a result of using or relying upon such classifications, groups,
or symbols for any purpose whatsoever.
Information relating to U.S. export rules and regulations can
be found at the U.S. Bureau of Industry and Security
Website. Information related to U.S. Customs and Border
Protection can be found at the U.S. Customs Website.
To Next Page
Loading...
