EasyManua.ls Logo

IPS 555ES - What You Should Know about Adhesive Formulas; The Different Grades (Weights) of Sealing Tape; Selecting Tape

IPS 555ES
35 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Better Packages Section 3
Sealing with Gummed Tape
21
WHAT YOU SHOULD KNOW ABOUT ADHESIVE FORMULAS:
Almost all adhesives today are starch-based and therefore very friendly to users and the environment.
Open time is the length of time (in seconds) that it takes the adhesive to begin to bond to the
corrugated.
- Adhesive formulas that are quick to set have a short “open time”.
- Adhesives that take longer to set have a longer open time.
As long as the adhesive has not yet set, the moistened piece of tape may be straightened or moved to
another location.
If there is stress on the carton seal, as in the case of an over-stuffed carton, then it is desirable to have
a shorter (quicker) open time.
If the carton is large, then it is desirable to have a longer open time.
THE DIFFERENT GRADES (WEIGHTS) OF SEALING TAPE
(LISTED IN ORDER OF INCREASING STRENGTH):
Paper tape
Economy grade reinforced tape
Light weight reinforced tape
Medium weight reinforced tape
Heavy weight reinforced tape
Extra heavy weight reinforced tape
Boxmakers tape
SELECTING TAPE:
Use the lightest and thinnest tapes for cartons:
- Of low value
- Shipped a short distance
- Stacked on a pallet and wrapped in shrink wrap
• Use the heavier and thicker tapes for cartons that:
- Are heavy
- Have great value
- Are shipped long distances
- Are shipped individually and are not shrink wrapped

Table of Contents