Better Packages Section 4
Maintenance
29
NOTE: All other moving parts of the machine are permanently lubricated and SHOULD NOT BE
LUBRICATED. Putting oil or grease on the oilite bearings clogs them up and makes them wear
prematurely.
CLEANING
Inside the dispenser:
• Brush out paper dust
• Do Not use spray cleaners
Exterior surface of the dispenser:
• Use a mild soap and water
• No ammonia based cleaning agents or solvents
CAUTION: Do not oil the feed roller shaft
WARNING: DO NOT USE SPRAY LUBRICANTS, SPRAY
CLEANER OR OTHER FLAMMABLE LIQUIDS, ON OR INSIDE
THIS TAPE DISPENSER.
To Next Page
Loading...