f.
RuneAudio (http://www.runeaudio.com)
From a fresh RuneAudio distribution:
IQaudIO Pi-DAC+ support is built in. Write SD card image, boot Pi.
ssh into the Pi as root (password rune) and edit /boot/config.txt to select the IQaudio Pi-DAC+ devicetree
overlay. Save and reboot
connect from web browser to runeaudio.local
select the pull down settings menu and select MPD, here change audio interface to IQaudIO DAC, beneath
this select Volume control: enabled-hardware
Press SAVE AND APPLY
g.
PiCorePlayer (https://sites.google.com/site/picoreplayer/home)
IQaudIO Pi-DAC+ support is built in.
h.
PiMusicBox (http://www.pimusicbox.com)
IQaudIO Pi-DAC+ support is built in.
i.
Raspbian (https://www.raspberrypi.org/downloads/)
IQaudIO support is easily enabled as documented in this user guide
j.
OpenElec (http://openelec.tv/get-openelec)
IQaudIO Pi-DAC+ support is configurable.
-
Download Stable Openelec 6.0.3 image from http://releases.openelec.tv/OpenELEC-
RPi2.arm-6.0.3.img.gz
-
write image to SD card
-
Boot Openelec
-
SSH into the Raspberry PI and edit config.txt to include the IQaudio device tree
-
mount -o remount,rw /flash
-
nano /flash/config.txt
# audio interfaces
dtoverlay=iqaudio-dacplus
# optional hardware interfaces
dtparam=i2s=on
-
Once above changes have been made, then ctrl+x to save.
-
mount -o remount,ro /flash
-
reboot
k.
Others
If you know of others please let us know by emailing us at info@iqaudio.com
To Next Page
Loading...
