Braava jet™ Owner’s Guide 9
EN
8 For Customer Care go to www.irobot.com/support
EN
Setup Guide
Follow these simple steps to get started with your
Braava jet™ Mopping Robot.
Charge & Insert the Battery
• Remove the battery and put it in the battery charger.
• The indicator light will blink amber while the battery is charging. The light will
switch to solid green when the battery is fully charged.
• The wall charger automatically goes into low-power mode when the battery is
fully charged to maintain the life of the battery and limit power usage.
• The battery will fully charge within 2 hours.
• Insert the fully charged battery into the robot.
1
Battery Tip #1: For best results in
rooms with a lot of furniture fully
charge the battery for 2 hours
before using the robot.
Battery Tip #2: iRobot also oers
additional batteries and chargers
as accessories for purchase, so
you can always have a charged
battery ready to go.
Charge Insert
To Next Page
Loading...
Need help?
General
Weight and Dimensions
