iRobot Braava jet User Manual

Braava jet™ Owner’s Guide 13
EN
12 For Customer Care go to www.irobot.com/support
EN
3
Slide in a Cleaning Pad
• Slide a Braava jet pad into the track on the bottom of the robot until
it clicks into place.
• You can attach a Braava jet pad from either side of the robot.
Fill the Robot with Water
• Fill the robot if you choose Wet Mop or Damp Sweep.
• Lift the robot handle to find the tank cap and lift and swivel it open.
• Slowly fill the tank to the top with warm water.
• Turn the cap back and close. Lower the robot handle before
starting the robot.
• Do not use any other cleaning solution with your robot other than water.
4
Setup Guide
Cleaning Tip: For
easier filling, tilt the
robot downward and
fill slowly with water.
Note: If you are using
a Dry Sweeping Pad,
skip to Step 5.

iRobot Braava jet Specifications

General

Material	-
Product color	White
Wipes quantity	4 pc(s)
Quantity per pack	10 pc(s)

Weight and Dimensions

Width	68 mm
Length	178 mm
Weight	14 g
Thickness	7 mm