13
Another setting within the Day Interval is the current day of the schedule. The current day
(displayed as today) can be set for any day within the interval. This number automatically
increases by one every day. When the current day number equals the Day Interval number,
a watering day will occur. For example, to water every third day starting today, a 3-day
interval would be set with today as day 3. To water every 5 days starting tomorrow, a 5-
day interval would be selected with the current day set as day 4.
To set a watering day schedule for each program:
1. Turn the function dial to the Water days position. The display will show the
current watering day schedule for the selected program.
2. Select Program A, B, C or D with the Program switch.
3. Set the watering day(s) for the program using one of the three following procedures:
Days of the Week, Odd Days/Even Days or Day Interval scheduling procedure.
4. Repeat steps 2 and 3 as necessary to set a watering day schedule for each program.
Days of the Week
a. Press the NEXT button until the weekday abbreviations are shown at the top of the
display.
b. Press the
ON button. sun (Sunday) will begin fl ashing.
c. To select the day, press the ON button. To remove the day from the schedule, press
the OFF button.
d. Press the NEXT button to select the next day.
e. Repeat steps c and d to set the remaining days of the week.
Odd Days or Even Days
a. Press the NEXT button until odd days or even days is displayed.
b. Press the ON button to select the schedule.
Optional: To remove selected days of the week from the Odd/Even watering schedule:
1. Press the NEXT button until the selected day begins fl ashing.
2. Press the OFF button to exclude the day from the schedule.
(Press the ON button to restore the day to the schedule.)
Day Interval
a. Press the NEXT button until the day interval option is displayed.
b. Press the
ON button to select this option.
c. Press the
NEXT button. The display shows the current Day Interval number (1–30).
d. Use the + or – button to select the Day Interval (1–30 days).
e. Press the NEXT button. The controller displays today and its current setting.
f. Use the
+ or – button to select the desired setting for today.
To Next Page
Loading...
Need help?
General
