ISA T1000 PLUS - Introduction

DOC. MIE91093 Rev. 1.34 Page 11 of 145
INTRODUCT ION
The single phase relay test set mod. T1000 PLUS is suited for
the testing and adjustments of the following types of relays;
the table lists also the paragraph that explains the test
procedure.
Type of relay
IEEE code
PARAGRAPH
- Distance*
21
1.12
- Synchronizing
25
1.8
- Over/under-voltage
27 - 59
1.2
- Power, varmetric or
wattmetric
32 - 92
1.4
- Under current
37
1.1
- Loss of field
40
1.10
- Reverse phase current
46
1.4
- Instantaneous overcurrent
50
1.1
- Ground fault
50N
1.1
- Timed overcurrent
51
1.1
- Power factor
55
1.4
- Directional overcurrent
67
1.5
- Directional ground fault
67N
1.5
- Automatic reclose
79
1.11
- DC voltage
80
1.3
- Frequency
81
1.6
- Frequency rate of change
81
1.7
- Motor protection
86
1.1
- Differential **
87
1.1
- Directional voltage
91
1.5
- Tripping relay
94
1.9
- Voltage regulation
1.2
- Thermal
1.1
- Timers
1.9
* For distance relays three T1000 PLUS are necessary.
** Differential starter circuit. With T1000 PLUS and D1000 or
with the TD1000 PLUS model, it is possible to test the
characteristic.